17 | iLuv
OPERATIONAL INSTRUCTIONS
If your iPhone or iPod is connected to the unit, it will charge automatically.
Charging your iPhone or iPod
Press
SNOOZE/DIMMER
to adjust the brightness of the display. It will return to normal after three
(3) seconds. Brightness setting ranges from OFF to 9.
Adjusting the Brightness of the LCD Screen
1. While unit is in playing, press
SETUP
.
2. Rotate the
SEARCH
wheel to select “5. BASS” or “6. TREBLE”.
3. Press
SELECT
to enter and rotate the
SEARCH
wheel to change.
4. Press
SELECT
again to confirm and exit.
Setting the Bass and Treble
If the system does not respond, there may have been a power surge that triggered the internal
computer to shut down automatically. If this occurs, disconnect the main power and connect it
again after approximately one minute.
Resetting the Unit
Maintenance
· Place the unit on a level surface away from sources of direct sunlight or excessive heat.
· Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or
other protective material should be placed between it and the furniture.
· Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning
agents, such as Benzine, thinner or similar materials can damage the surface of the unit.