HD Radio Receiver with iPod Dock and Dual Alarm Clock
V10M10_IM_EN_03032008
www.i-Luv.com
- 18 -
OPERATIONAL INSTRUCTIONS
Docking your iPod
Select a suitable adaptor for your iPod and insert it into the dock. Your iPod can now be inserted into the dock
by placing the connector on the bottom of the iPod onto the connector in the docking bay.
Note:
Be careful when seating the iPod into the docking to avoid damaging the 30-pin connector on the iPod or
in the docking system.
1. Press
the
POWER
Button to turn on the unit.
2. Press
the
FUNCTION
Button to select iPod mode.
3.
Your iPod will start playing automatically and start charging immediately.
4.
Adjust the sound level by pressing the
/–
Buttons.
5.
To remove the iPod from the unit, press and hold the
PLAY/PAUSE
Button for three seconds to
switch off the device and then gently remove it from the docking connector.
iPod Playback Control
•
Press
the
PLAY/PAUSE
Button to pause or resume the iPod playback;
•
Press
the iPod Skip/Search Forward
or
Backward
button to skip to the next or previous song;
•
Press and hold the HD Radio
TUNING
TS
buttons or remote control
I
__
or
``
I
buttons or
iPod Skip/Search Forward
or
Backward
button for fast-
forwarding or fast-rewinding during playback.
Docking your iPod nano
Insert the correct dock adapter for your iPod nano.
1
st
Generation iPod nano:
Make sure the connector on the bottom of your iPod nano is positioned over the connector in the i169 dock prior to seating your iPod nano. Carefully slide
the nano down onto the connector in order to insure a secure connection.
2
nd
Generation iPod nano:
Make sure on the bottom of your iPod nano is positioned over the connector in the i169 dock prior to seating your iPod nano. Carefully slide the nano down
onto the connector in order to insure a secure connection.
Note:
Be careful not to damage the connector when docking your iPod nano.
Never use force when docking your iPod nano into the connector.
