8
9
5. Installation
5. Installation
Power cable
Video output cable
(Red)
(Black)
5-2. How to install to W al l
① Drill three screw holes on the wall plate to fix three plastic anchors (supplied) in the
holes.
② Fix the plastic anchors in the holes.
③ Position the mounting bracket on the screw points.
④ Fix the mounting bracket by tightening the screws.
⑤ Slightly loosen knob (A) then adjust tilt(180˚) and rotation(360˚) of the camera and
tighten the knob firmly.
⑥ Slightly loosen knob (B) then adjust pan(360˚) of the camera and tighten the knob
firmly.
Plastic anchor
Mounting Screw
(Ø4x30L_3EA)
(A)
(B)
5-3. 3-Axis adjustment
① Pan 360˚
Slightly loosen Pan knob then adjust pan of the camera and tighten the knob firmly .
② Tilt 180˚
Slightly loosen Tilt knob then adjust tilt of the camera and tighten the knob firmly.
③ Rotation 360˚
Slightly loosen Tilt knob then adjust rotation of the camera and tighten the knob firmly.
TILT(180˚)
ROTATE(360˚)
Pan knob
Tilt knob
5-4. Rear Hole Plugs
N
O
W
T
O
A
Zoom
Hole Plug
B
Focus
Hole Plug
① DO NOT ATTEMPT TO ADJUST
The VN70LP uses parts common to another camera. Although the rear plate is
labeled with “Zoom” & “Focus” controls, none exist with this fixed lens camera.
These are merely hole plugs.
C
Hole Plug
