3
© Copyright 2020, ILUMINAR Lighting
Subject to change without notice.
2
Make sure the power cord is correctly connected and the lamp is securely in place.
Disconnect the fixture from the power supply prior moving the unit or performing any maintenance or
lamp changes.
DO NOT open the ballast case, it will void the warranty.
DO NOT support the ballast by power cord(s). These cords/connections are not designed to bear weight.
DO NOT make contact with the interior of the socket while power is on.
DO NOT attempt to rewire, alter, modify or reconfigure your system - this will void the ILUMINAR
warranty and could create serious safety hazards, or cause bodily injury or death, as this is a high
amperage and voltage device.
DO NOT submerge in water.
DO NOT plug the system into untested or unidentified voltage other than what is designated on ballast.
DO NOT CONNECT A CMH BALLAST to a Flip Box. It will void the warranty and can cause electrical
failure within the CMH Ballast. Flip or Switch Boxes are not recommended for any CMH Units or for any
high wattage ballasts.
DO NOT plug or unplug the lamp cord while the ballast is connected to power.
Make sure to wear proper gloves to protect from the transfer of oil from the skin to the lamps glass
surface.
When changing out the lamp, make sure that the lamp has time to cool before touching.
Make sure the lamp is correctly locked into the socket, properly securing the lamp.
If the lamp is damaged in any way (cracked, loose internal connections) replace the lamp immediately.
Keep away from Children. This product contains delicate electronic components. If it is placed near
an object that transmits radio signals, it could cause interference (i.e.: mobile devices, walkie talkies,
CB radios, remote controls and microwaves). If interference occurs, move such objects away from the
appliance.
WARNINGS
THANK YOU
for purchasing an
ILUMINAR Lighting CMH FIXTURE
. We strive to deliver the best
customer service alongside world-class products and we go above and beyond to make sure you are
satisfied with your purchase. The following is a general set of warnings and basic guidelines for the
ILUMINAR CMH DE Fixture. Always have an expert install your product(s).
KEEP ORIGINAL PACKAGING
In the event of a return, products will need to be in the original ILUMINAR packaging to avoid product
damage during shipping. Any damage to products not in their original packaging will not be covered
under the Warranty. Visit iluminarlighting.com/warranty for more detailed information.
SAFETY 1ST
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN ELECTRICAL SHOCK AND
SERIOUS INJURY. Additionally, failure to follow these safety warnings can/will result in a void of all
warranties as well as any manufacturer liability.
© Copyright 2020, ILUMINAR Lighting
Subject to change without notice.
© Copyright 2020 ILUMINAR Lighting
Subject to change without notice.
1.2m / 4'
1.5m / 5'
MOUNTING & COVERAGE
Toll Free: 1-877-540-5588
iluminarlighting.com
235mm / 9.26”
249mm / 9.8”
HOT SPOT
601mm / 23.6”
1000W
DE FIXTURE
CMH
VOLTAGE:
208-277V
SKU:
IL-CMHDE1000-240
Case Length
Case Width
Height
Weight
PHYSICAL SPECIFICATIONS
564mm
249mm
601mm
6.6kg
22.22"
9.80"
23.66"
14.55lb
5.10A
4.60A
3.85A
208V
277V
240V
INPUT SPECIFICATIONS
Input Current
Input Power
Rated Main Voltage
Voltage Range
Ignition Voltage
Dimming Type
THD
Controller
Min Power Factor
Crest Factor
Input Connection
Main Frequency
Operation frequency
Relative Humidity
Max Allowable Case Temperature
Ambient Temperature
Recommended Lamp
Socket TypeLamp Base
Mounting Height
1045W
208-277V
187-290V
5kV
Gear / 945 / 1000 / EXT
<15%
0 -10V
0.95
1.7
IP68 Wieland Plug
50 - 60Hz
140-220HZ
95% (Non-condensing)
75°C/167°F
-20...+40°C / -4...+104°F
ILUMINAR CMH 1000W DE
K12x30s - / Style
1.2m / 4'
Lamp Not Included.
Energy efficient
Uniform Light Distribution
Soft Start Technology
Ignition Failure Protection
Please read carefully prior to beginning installation.
