7
TR-CUT25
OPERATING INSTRUCTIONS
Be sure to read instructions carefully, wear safety goggles, and keep fingers away from cutting
head.
NOTE: Connect head to 10,000 PSI hydraulic pump.
CUTTING
1. Retract the blade fully.
2. Unlatch the tool head by pulling up on release lever.
3. Close head and latch around material. Be sure tool is completely latched or damage will occur.
4. Make sure all cuts are made perpendicular to the cutting head or damage will occur to blades.
5. Advance the blade.
6. Once cut is complete, fully retract blade.
CAUTION: always wear eye protection
while cutting
WARNING:
Hardened material can fly
when cutting. Always point away from
people or objects.
