iLOQ Oy • Oulu, Finland • www.iLOQ.com • iLOQ is registered trademark of iLOQ Oy •
©2018 iLOQ Oy. All Rights Reserved •
3.
Slide the new knob on the neck so that the screw hole is facing the same direction as
the three knob adjustment slots in the neck.
Always slide the knob to the bottom,
otherwise the weather protection sealings will not function correctly.
4.
Tighten the screw by using the 1.5 Nm torque. Ensure that the head of the screw goes
into the hole completely. A visible cap indicates that the screw is not in the right place
