Page 4 of 16
2. AFTER INSTALLATION
Test the cylinder functionality after installation to ensure that it does not prevent the lock case from
working properly.
3. CARE
After 5-10,000 usages, clean contact rolls lightly with lint-free cotton pad. Spray small amount of high-
quality lock oil i.e. CRC lock oil (with PTFE) onto contact rolls.
In the case the cylinder is not working in an appropriate way anymore, we recommend cleaning the
cylinder with e.g. compressed air spray or similar.
4. INSTALLATION OF ILOQ D5S.1XX SERIES
A. Ensure the cam is pointing downwards and slide lock cylinder through the lock case.
B. Fix cylinder into lock case by iLOQ fixing screw (A10.64, part of the delivery), use tightening
torque 0.9 ...1.1 Nm. If necessary, cut the screw to the correct length.
(calculation screw length: L = b 10 mm).
The screw has cutting grooves to make the cutting easier.
C. Make sure the cylinder frame is a maximum of 1.0 mm from the door leaf or escutcheon.
B.
A.
C.
