iLOQ Oy • Oulu, Finland • www.iLOQ.com • iLOQ is registered trademark of iLOQ Oy •
©2018 iLOQ Oy. All Rights Reserved •
5. INSTALLATION OF ILOQ D50S.2XX(A).SD SERIES
A
B
A.
Loosen the screw using a Torx T10 tool.
B.
Remove the knob from the other side of the cylinder.
Attention: in high-security versions, the outside lock unit is marked with text ”Outside”.
C.
Ensure the cam is pointing downwards. Slide the lock cylinder through the lock case. Make sure
the cylinder frame is a maximum of 1.0 mm from the door leaf or escutcheon.
F
D
E
D.
Fix the cylinder into the lock case using an iLOQ fixing screw (A10.64). If necessary, cut the
screw. Use a tightening torque of 0.9 … 1.1 Nm.
E.
Slide the knob onto the knob shaft.
F.
The knob distance can be adjusted if needed. Please refer to chapter 7 for details.
C