iLOQ Clock battery A00.14 installation instructions
26875 / 30 / 01
Page 1
Replacing/adding the battery in iLOQ D10S.x Europrofile cylinder
4
H.
Remove the battery cover from the battery holder.
I.
Slide old battery out from the battery holder with the TORX 6
tool.
Replace the battery with a new one. Put the battery cover back
in its place.
3
E.
Turn the authorized key 15° clockwise.
F.
Turn the TORX 6 tool ~90° clockwise.
G.
Remove the knob cover.
2
C.
Insert the TORX tool 6 into the marked hole.
D.
Insert an authorized key into the cylinder.
1
A.
Insert a TORX 6 tool into the knob hole and remove the screw.
B.
Remove the front plate.
Before replacing/adding the battery
1) These instructions should be carefully followed during replacing the battery.
2) These instructions should be passed on by the installer to the user.
3) The product should not be modified in any way except in accordance with those modifications described in these instructions.
