3
Installation and mounting
Check everything in the box matches the order form and packing slip.
Contact your dealer if any item is missing.
The box contains the following items:
•
One junction box
IFBMNTBOX
•
One Quick Start Guide 8200-1454-01 A0
•
One waterproof rubber sealing gasket
•
Six security torx screws
•
Six plastic anchors and screws (TP4)
Required tools
The following tools assist with installation:
•
A drill
•
A hammer
•
A Phillips head screw driver
•
Wire cutters
Installation and mounting procedure
To install and mount the camera, complete the following steps:
1
Drill 6 holes on the wall or surface, based on the mounting template.
2
Hammer the 6 screw anchors into the drilled holes.
3
Fix the junction box onto the wall or surface by fastening the 6 TP4 Tapping screws with the 6
screw anchors
Figure 2. Fixing the Junction Box
4. Pass the cable thread of the camera through the adapter plate, and then secure the camera with the
adapter plate by fastening the 4 T20 screws.
