Save your own settings to presets
_
1
_
~
_
8
_
and use them
instantaneously when jamming.
(1) Turn the rotary encoder in the center to choose the effect
model of your choice.
(2) Adjust the 4 knobs above to create the perfect sound.
(3) Push down on the rotary switch for 2 seconds
and the LED will start to blink.
(4) Turn the rotary encoder to any of the preset position
_
1
_
~
_
8
_
.
(5) Press the rotary switch again and the current sound will be
saved in the selected position.
(6) Use
_
PRESET
_
↑ /
_
PRESET
_
↓ switch to shuffle through and
activate the preset of your choice.
※ On pressing
_
PRESET
_
↑ /
_
PRESET
_
↓
switch,
The
_
PRESET
_
LED on the bottom left face will light up
to indicate that you are in the preset mode.
※ The preset positions of
_
1
_
~
_
8
_
are independent from
the effect models written next to them. That is, you can save
any effect model to any preset number that you want.
-
Decay/reverb time that determines how long the reflections
persist. Turn clockwise to increase the length.
The left hand LED indicates the volume of the reverb with
its brightness.
-
Adjusts the low range frequency of the reverberation.
Turn clockwise to obtain a deeper bass sound.
-
Attenuates the decay speed in the higher frequency range.
Counter clockwise renders a dark and smooth space,
while the clockwise direction makes the resonating space feel
brighter and colder.
-
Sets the level of the delay and dry sound. At 3 o’clock
the volume of the delay is equal to the dry sound (1:1 ratio),
turn further clockwise and the dry sound will be disappeared.
The
connector can accommodate an
external switch or expression/volume
pedal. Make sure to turn off the power
before connecting an external pedal.
Depending on the maker of the pedal,
the polarity may be different, so please
check beforehand for compatibility.
-
Switch Pedal
: Can be set to
_
PRESET
_
↓
switch. Every press will
change the current preset
_
1
_
~
_
8
_
in decreasing order.
-
Expression/Volume Pedal
: With this,
you can adjust a selected parameter,
one of the 4 control knobs.
Please refer to
“Choosing an EXP Parameter”
.
If you power the unit up while pushing down on the central rotary switch, this
will allow you to change
setting. You can map the expression/volume pedal
to one of the 4 control knobs. The unit will cycle through the controls as long
as the rotary switch remains pressed, with the LED
_
3
_
_
4
_
_
5
_
_
6
_
indicating
the selection of each of the corresponding knobs. Let go when the desired
parameter is selected.
※ This is only for when you have an expression/volume pedal to
connector.
Select the desired effect with the rotary encoder in the center.
-
Feel the majestic reflections of a well-designed concert hall.
-
This is a natural, orderly reverberations you would experience
in a studio live room.
-
The tidy, polished sound of a studio-grade metal-plate reverb.
-
Swinging brilliantly, the sweep reverb makes your song’s sound
all the sweeter.
-
A gated reverb only kicks in during play,
making for a more powerful and dynamic sound profile.
-
Feel the unique charm of a ducking delay
that responds to your picking.
-
Harmonic overtones spread out to emulate the sensation
Of marbles sparkling in the light.
-
A perfect reproduction of soft “twangy” sound you would expect
from a vintage amp's tin-can spring reverb unit.
The switch on the right lets you select the bypass mode of your choice.
-
The signal passes as if there was nothing on the way.
-
Provides a low impedance buffer bypass,
allowing for a natural fade out when effect is off.
Switch Pedal
Tip
Signal
Sleeve
Ground
※ When switch is engaged,
Tip and Sleeve are in contact.
Tip
Signal
Ring
Voltage
Sleeve
Ground
-
Turns the effect on and off.
When the LED is lit up, the effect is functioning,
and when it is off, you are in bypass mode.
-
_
PRESET
_
Functions as a preset-up
_
PRESET
_
↑
switch.
Every press will change the current preset
_
1
_
~
_
8
_
in increasing order.