background image

9

OPERATION

ADJUSTING THE LIGHT DIRECTION

The light head can be tilted vertically up to 30° down or 90° up. To adjust the light direction, 

loosen the Side Locking Knob (6). Adjust the light head to the desired position, and re-tighten  

the knob.

ON/OFF SWITCH

The light head is equipped with an ON/OFF Switch (4) located on the back side of the light. Press 

the switch once to turn the light on, and press the switch a second time to turn it off. Always 

turn the light off before unplugging. 

MAINTENANCE

Your light requires very little care and maintenance. Simply clean the lens regularly with a  

non-abrasive cleaner. Use similar care for the stand and tripod.

 CAUTION:

 Always make sure the work light is unplugged and completely cool before 

attempting to clean it. 

 

Do not dispose of electrical appliances as unsorted municipal waste; use separate  

collection facilities. Contact your local government for information regarding the collection 

systems available. If electrical appliances are disposed of in landfills or dumps, hazardous 

substances can leak into the groundwater and get into the food chain, damaging your 

health and well-being.

WARRANTY

SAVE YOUR RECEIPTS. THIS WARRANTY IS VOID WITHOUT THEM.

1 YEAR

LIMITED WARRANTY

This product is backed by a one year limited warranty. This warranty covers manufacturer 

defects and workmanship. The warranty excludes misuse or abuse and normal wear and 

tear. This warranty gives you specific legal rights, and you may have other rights, which vary 

from state to state.

WARNING: 

Cancer and Reproductive Harm. www.P65Warnings.ca.gov

Summary of Contents for WL-6000T













Reviews: