Page 23
Registered Mode
Unifi may operate in registered or unregistered mode. Operating in registered mode is
advantageous if you are performing at a venue with multiple performers using Unifi as it
prevents “cross-talk” between other users of Unifi products.
Every Unifi device contains a unique Electronic Serial Number (ESN); this allows individual
devices to be registered with your equipment and ignore transmissions from Unifi devices
that are not yours.
By default, Unifi operates in the unregistered mode so that it responds to all Unifi devices.
•
If you want your Thumper and Unifi iOS App to ONLY respond to YOUR devices,
then you run the system in registered mode.
•
If you would like your Thumper and Unifi iOS App to respond to ANY Unifi device,
then you run the system in unregistered mode.
Each time an Unifi device transmits, the Green LED on the Thumper will flash to indicate
it has received the message. However, if the Unifi Device is not registered, then this
transmission will be ignored.
To run the system in registered mode:
1.
Open the Unifi Thumper App.
2.
Turn on your Thumper.
3.
Pair your Thumper with the Unifi App:
a.
Go to Settings
Devices
Thumper
Pair Thumper.
b.
Under “UNPAIRED THUMPERS,” tap on the unpaired Thumper.
c.
Tap on “Yes,” when asked, “Are you sure you want to connect THUMPER?”
4.
Power up all dice.
5.
Register each dice with the Unifi App:
a.
Go to Settings
Devices
Dice/
b.
Under “UNREGISTERED DICE” tap the dice you want to register.
c.
Tap on “Yes” when asked “Are you sure you want to connect the Dice?”.
6.
Go to Settings
Thumper
Settings and enable “Respond Only to Registered Devices.”
7.
When operating in “Registered Mode,” only the registered devices will be
transmitted to the Unifi App from the Thumper.
Summary of Contents for Unifi Dice
