Installation
Ilumipod 18 IP Optic Series User Manual Rev. 08
9
To assign
individual DMX
addresses to
each product, you
must connect the
Ilumicode controller to
each product, individually.
ILUMINARC®
suggests that you
connect no more
than 20 products
in this mode and keep the
total distance to less than
60 m (197 ft). Otherwise,
you might need to use an
optically isolated signal
amplifier.
Ilumicode
The Ilumipod 18 IP uses the Ilumicode addresser for configuration purposes. The diagram
below shows how to connect the Ilumicode to this product.
Note that this connection will control multiple products at the same time, all having the
same DMX address.
ILUMICODE
Addresser
All manuals and user guides at all-guides.com
