4 OF 5
INSTALLATION INSTRUCTIONS
STEP 5:
NOTE: If you need to replace glass panel
a. By unscrewing the Lock Screws, remove the Cage from
the Fixture Hood.
b. Remove the broken Glass Panel inside of the Cage and
insert the replacement Glass Panel.
c. Attach the Cage with Glass Panels back onto the Fixture
Hood and secure with Lock Screws. Hand tighten until
snug.
Mounting Hole
Lock Screw
Cage with
Glass Panels
Fixture
Hood
Hole
Glass Panel
EXTERIOR GRADE
CAULK
MOUNTING BALL
STEP 6:
a. Refer to the following information for caulking instructions:
Please note that you are required to apply a small
amount of Silicone sealer to the threaded side of the
MOUNTING BALLS and then install them onto the
MOUNTING SCREWS.
With the OUTDOOR FIXTURE properly installed in
accordance with supplied Assembly/installation
instructions, proceed with caulking instructions below.
Note: Be sure EXTERIOR WALL SURFACE and
FIXTURE BACKPLATE are free to dirt to caulking. Using
EXTERIOR GRADE CAULK, start on one side of
FIXTURE BACKPLATE and follow contour, were the
FIXTURE BACKPLATE meets the EXTERIOR WALL
SURFACE upward. Proceed to caulk over top of
backplate and down other side.
to ensure proper
moisture drainage.
DO NOT CAULK
BOTTOM OF FIXTURE BACKPLATE
