Illuco IDS-1100 Instruction Manual Download Page 10

 

IDS-1100 Dermatoscope 

Sleep Mode 

In order to save on electrical consumption, the IDS-1100 is designed to be powered off automatically when it is in 

a non-operational sate for 5minutes.   

 

Maintenance 

Note 

The lenses and polarization filters installed on the IDS-1100 must be treated as high quality optical parts. Use only 

a standard lens cleaning equipment for cleaning and protect them from harmful chemicals.   

-Exterior cleaning 

The exterior of the IDS-1100 may be cleaned or sterilized with isopropyl alcohol (70% vol.) 

Do not use any kind of disinfectants, acetone or chemicals other than isopropyl alcohol. 
-Lens cleaning 

Cleaning  your  IDS-1100  lenses  should  be  a  regular  (although  not  too  regular)  part  of  any  IDS-1100  owner’s 

maintenance. The lenses on the IDS-1100 are hard multicoated. Wipe the lenses with using alcohol or water. Use 

the lens cleaning cloth exclusively made for the IDS-1100 or other normal lens cleaning clothes.   

Lens cleaning fluid: 

You may find an alcohol based lens cleaning fluid which is well worth having. It will help you to lift off fingerprints 

and other smudges without leaving streaks on your lens.   

Keep in mind that you don’t need too much of them at a time. Usually just a drop or two wiped in a gentle circular 
motion with a cleaning tissue will remove marks on a lens or a filter.     

Always apply the fluid to a cloth or tissue rather than the lens itself. Otherwise it can easily leave a mark on. 

Good approach is to start with breath and then use fluids for difficult marks to remove. 

-Protect glass cleaning (disinfection) 

The scale on the protect glass is chrome plated. So you can clean it with alcohol with no concern about being 

wiped  off.  Dermatoscope  is  classified  as  non-critical  instrument.  Therefore,  low  level  disinfection  methods  are 

requested. Use 70% ethanol or isopropanol for disinfection. Principally non-contact examination is requested when 

09 

Summary of Contents for IDS-1100


















Reviews: