3
GENERAL SAFETY INSTRUCTION
Fans are UL/cUL Listed, Standard 705.
1.
Do not depend on any switch as the sole means of disconnecting power when
installing or servicing the fan.
2.
Always disconnect, lock-out, and tag-out power source before installing or
servicing. Failure to disconnect power source can result in fire, shock, or serious
injury.
3.
Motor will restart without warning after thermal protector trips. Do not touch
operating motor; it may be hot enough to cause injury.
4.
Do not place body parts or objects in fan or motor openings while motor is
connected to the power source.
5.
All electrical connections should be made by a qualified electrician.
6.
These utility exhaust fans are for general purpose exhaust applications only. Do
not use these exhaust fans in an area where corrosive or explosive materials may be
found.
7.
Follow all local and state/provincial electrical and safety codes in the United
States and Canada, as well as the National Electrical Code (NEC) and the Occupational
Safety and Health Act (OSHA) in the United States, and the Canadian Electric Code
(CEC) in Canada.
8.
Always disconnect power source before working on or near a motor or its
connected load.
9.
Protect the power cable from coming in contact with sharp objects.
10. Do not kink or create tight bends in the power cable and never allow the cable
to come in contact with oil, grease, hot surfaces, or chemicals.
11. Make certain that the power source conforms to the requirements of your
specific exhaust fan model. The fan frame and motor must be electrically grounded to
a suitable electrical ground, such as a grounded water pipe or ground wire system.
12. To reduce the risk of injury to persons, please observe the following: In the
United States, OSHA compliant guards are required when fan is installed within 7 feet
of the floor or working level. In Canada, CSA compliant guards are required when fan
is installed below 2.5 meters (8.2 feet) above the floor or grade level.
13. Questions? Please contact our service center by calling
1-800-317- 1688
.