iLiving ILG8W24-51EC Owner'S Manual Download Page 4

4

as motor may restart unexpectedly.
8. Do not operate any fan with a damaged cord or plug. Discard fan or return to an
authorized service facility for examination and/or repair.
9. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or
similar coverings. Do not route cord under furniture or appliances. Arrange cord
away from traffic area and where it will not be tripped over.
10. Disconnect the fan when moving it from one location to another.
11. Make sure the fan is on a stable, flat surface while it is in operation.
12. Disconnect the fan when removing the guards for cleaning.

WARNING: Use of a three-prong to two-prong adapter is not
recommended. Improper connection may create the risk of electrocution.
Use of such adapters is prohibited in Canada.

WARNING: Do not depend on any switch as the sole means of
disconnecting power when installing or servicing the fan. Failure to do so
may result in fatal electrical shock.

WARNING: Do not insert fingers or foreign objects into the fan. Do not
block or tamper with the fan in any manner while it is in operation.

WARNING: Do not touch motor. May be hot enough to cause injury.

WARNING: Unplug prior to servicing unit.

WARNING: To reduce the risk of fire or electric shock, do not use this fan
with any speed control device.

SAVE THESE INSTRUCTIONS

Summary of Contents for ILG8W24-51EC













Reviews: