7
OPERATION INSTRUCTION
TO ADJUST AIRFLOW UPWARD OR DOWNWARD
: Loosen the position knob (10) first
and then loosen the pivot screw (15). Tilt the motor (16) to the desired angle and
then firmly tighten the pivot screw first and then the position knob.
SPEED CONTROL
: Pull the chain to
LOW, MEDIUM
or
HIGH
to set to the desired
speed.
MAINTENCE AND CLEANING
WARNING
:
Parts replacement and troubleshooting to be performed only
by qualified personnel.
WARNING
:
Do not depend on any switch as the sole means of
disconnecting power when installing or servicing the fan. Failure to do so
may result in fatal electrical shock.
WARNING
:
Unplug the fan from the wall outlet before servicing or
cleaning.
CAUTION: There is no user maintenance part except regular cleaning as
following description. All other servicing or maintenance should be
performed by qualified service personnel.
To clean the fan, use a soft damp cloth. Wipe down with a dry cloth.
Do not use cleaners that are harmful to paints or plastics.
CAUTION: Do not use gasoline, benzene, thinner, harsh cleaners, etc.,
which are dangerous and will damage the air circulator.
The propeller, guard, and motor should be cleaned periodically to
prevent overheating, and/or operating in an imbalanced condition.
CAUTION: If cleaning requires the removal of a guard, remove only the
front guard and re-install when finished in its originally installed position.
Do not repair propeller if it becomes damaged. The propeller is
accurately balanced at the factory and should be replaced if damaged.
Do not bend the blades.
Motor is permanently lubricated.
