background image

2

Safety Instructions & Warnings

Important Safety Instructions

•  Read these Instructions.

•  Keep these Instructions.

•  Heed all Warnings.

•  Follow all instructions.

•  Do not use this apparatus near water.

•  Clean only with a dry cloth.

•  Do not block any ventilation openings. Install in accordance 

with the manufacturer’s instructions.

•  Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) 

that produce heat.

•  Do not defeat the safety purpose of the polarized or 

grounding - type plug. A polarized plug has two blades with 

one wider than the other. A grounding type plug has two 

blades and a third grounding prong. The wide blade or the 

third prong are provided for your safety. When the provided 

plug does not fit into your outlet, consult an electrician for 

replacement of the obsolete outlet.

•  Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the point 

where they exit from the apparatus.

•  Only use attachments/accessories specified by the 

manufacturer. 

•  Unplug this apparatus during lightning storms or when 

unused for long periods of time.

•  Refer all servicing to qualified service personnel. Servicing 

is required when the apparatus has been damaged in any 

way, such as power-supply cord or plug is damaged, liquid 

has been spilled or objects have fallen into the apparatus, the 

apparatus has been exposed to rain or moisture, does not 

operate normally, or has been dropped.

•  Use only with a cart, stand, tripod, bracket, 

or table specified by the manufacturer, or 

sold with the apparatus. When a cart is used, 

use caution when moving the cart/apparatus 

combination to avoid injury from tip-over.

WARNING

: To reduce the risk of electric 

shock, do not remove cover (or back). No 

user-serviceable parts inside. Refer servicing 

to qualified service personnel.

ATTENTION

RISQUE D' ÉLECTROCUTION

NE PAS OUVRIR

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The exclamation point within an equilateral 

triangle is intended to alert the user to 

the presence of important operating and 

maintenance (servicing) instructions in the 

literature accompanying the appliance.

This symbol indicates that this product 

incorporates double insulation between 

hazardous mains voltage and user accessible 

parts.

The lightning flash with arrowhead symbol, 

within an equilateral triangle, is intended to 

alert the user to the presence of uninsulated 

“dangerous voltage” within the product’s 

enclosure that may be of sufficient magnitude 

to constitute a risk of electric shock to persons.

WARNING

: DO NOT INGEST BATTERY, 

CHEMICAL BURN HAZARD.

WARNING : 

This product can expose you 

to chemicals including lead, which is known 

to the State of California to cause cancer and 

birth defects or other reproductive harm. For 

more information go to www.P65Warnings.

ca.gov. 

This product meets and complies 

with required Federal product guidelines

Summary of Contents for ITTB2022B














Reviews: