9
Initial Bluetooth Connection and Playing Audio
1. When first powered ON the unit defaults to Bluetooth mode. A voice will say, “Bluetooth,” and the LED indicator
will quickly flash blue. When pairing, remain within 3 feet of the Bluetooth device.
2. Using the controls on your Bluetooth device, select
ITBSW241
in the Bluetooth Settings Menu to pair. If need
be, refer to the user’s manual for your specific device for more information.
3. When successfully paired, a voice will announce, “Bluetooth is connected,” and the LED indicator will turn solid
blue. Audio from the connected Bluetooth device will now be heard through the speaker.
4. Use the controls on the connected Bluetooth device to select and play audio. Use the speaker controls or the
connected Bluetooth device to play, pause, and adjust the volume level.
5. After initial pairing, anytime the speaker powers ON it will automatically connect to the last Bluetooth device
used.
Note:
If your device should become unpaired or you find it is unable to connect, press and hold the
Play
button (on remote), or Pair button (sound bar)
to enter to Pairing Mode. A voice will announce, “Bluetooth is
connecting,” and you can connect to the speaker manually.
Note:
This sound bar has a last-function-used memory; it will resume using the last mode before it was turned OFF
after it is turned ON again.
Troubleshooting
If the sound bar should become unpaired or will not connect normally, follow these steps in your device’s
Bluetooth Settings Menu.
• Delete the sound bar (“Forget This Device”).
• Turn Bluetooth OFF, then ON again, and repeat the
Initial Bluetooth Connection
steps.
Connecting Devices
Aux In
Requires a 3.5mm audio cable (included).
1. Connect the 3.5mm to RCA cable to the 3.5mm
Aux in
on the sound bar and the other end into your TV or other
device.
2. Power ON the sound bar and press
Source
on the sound bar or
Aux
on the remote to select
Aux In Mode.
A
voice will announce the source mode and the indicator will turn green.
3. Use the controls on the connected device to select and play audio. Be sure the
volume on your connected device is audible when you begin playing.
PAIR/LEARN AUX IN
SOURCE/
VOL
+
VOL
–
Summary of Contents for ITBSW241
Page 11: ...11...