background image

2

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE 

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

WARNING: To reduce the risk of fire or electric shock, do 

not expose this apparatus to rain or moisture.

AVERTISSEMENT: Pour réduire le risque d’incendie ou de 

choc électrique, ne pas exposer cet appareil sous la pluie et 

l’humidité.

CAUTION: Use of any controls or adjustments or 

performance of procedures other than those herein 

specified may result in hazardous radiation exposure.

WARNING: Changes or modifications to this unit not 

expressly approved by the party responsible for compliance 

could void the user’s authority to operate the equipment.

WARNING: Do not place the unit on top of any soft, porous, 

or sensitive surfaces to avoid damaging the surface. Use a 

protective barrier between the unit and surface to protect 

the surface.

WARNING: Use of this unit near fluorescent lighting may 

cause interference regarding use of the remote. If the unit is 

displaying erratic behavior move away from any fluorescent 

lighting, as it may be the cause.

CAUTION:  Danger of explosion if battery is incorrectly 

replaced. Replace only with the same or equivalent type.

PRÉCAUTION:

 Danger d’explosion si les piles sont remplacées 

de façon incorrect. Remplacer les piles seulement par le même 

type de pile ou l’équivalent.

WARNING: The battery, batteries, and battery pack shall 

not be exposed to excessive heat such as sunshine, fire, or 

the like.

WARNING: Lithium batteries, like all rechargeable batteries 

are recyclable and should be recycled or disposed of in 

normal household waste. Contact your local government 

for disposal or recycling practices in your area. They should 

never be incinerated since they might explode.

WARNING: Shock hazard - Do Not Open.

AVIS

: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR

Mains Plug or Direct plug-in adapter is used as disconnect 

device and it should remain readily operable during 

intended use. In order to disconnect the apparatus from the 

mains completely, the Mains Plug or Direct plug-in adapter 

should be disconnected from the mains socket outlet 

completely.

La fiche d’alimentation ou adaptateur de courant est utilisé 

comme dispositif de déconnexion et doit rester accessible 

pendant l’utilisation. Pour mettre l’appareil hors tension, la 

fiche ou adaptateur de courant doit être débranché de la prise 

de courant.

The lightning flash with arrowhead symbol, within 

an equilateral triangle, is intended to alert the user 

to the presence of uninsulated "dangerous voltage" 

within the product's enclosure that may be of 

sufficient magnitude to constitute a risk of electric 

shock to persons.

WARNING: TO REDUCE THE RISK OF 

ELECTRIC SHOCK, DO NOT REMOVE 

COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER 

SERVICING TO QUALIFIED SERVICE 

PERSONNEL.

ATTENTION

RISQUE D' ÉLECTROCUTION

NE PAS OUVRIR

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The exclamation point within an equilateral triangle 

is intended to alert the user to the presence of 

important operating and maintenance (servicing) 

instructions in the literature accompanying the 

appliance.

Warnings and Precautions

Summary of Contents for ITB382B













Reviews: