Docking an iPod
1. Locate the numbered
Bracket
that fits
the iPod that will be docked.
Each included Bracket has a number
on it, indicating which iPod model
that bracket is compatible with. See
the separate bracket chart page to
identify which bracket is needed.
2. Snap the
Bracket
into place over
the iPod connector in the
Docking
Station
.
All Brackets will only fit one way onto
the Dock.
When inserting an iPod nano (first
or second generation), slide the
Dock connection on the unit so that it
matches the opening on the iPod nano
(first or second generation).
3. Connect the iPod to the iPod
connector inside the
Docking
Station
.
Once an iPod is connected to the
Docking Station
, the unit will play
and charge the docked iPod.
Playing an iPod
1. Connect an iPod to the
Docking
Station.
(
See “Docking an iPod”)
. Press the
Power Button
to turn the
unit on.
. Press the
Source Button
to switch the
unit to iPod Mode.
. Press the
Play/Pause Button
to begin
playing the docked iPod.
5. Turn the
Volume Buttons
to increase
or decrease the volume of the unit.
. Press the
REV
and
FWD Buttons
to
skip tracks. Press and hold the
REV
and
FWD Buttons
to search through
individual tracks.
. Press the
Chapter, Album,
or
Playlists Buttons
on the remote
to navigate through the chapters,
albums, or playlists on a docked iPod.
8. Press the
Directional Buttons
and
Select Button
on the remote to
navigate the iPod’s menu and make
selections.
9. Press the
Repeat/ST Button
to turn
the repeat option on the docked
iPod, off or on. Press the
Repeat/ST
Button
once to repeat the current
audio track and twice to repeat an
entire album or playlist.
10. Press the
Menu Button
on the remote
to access the docked iPod’s menu
Please note, if the docked iPod is not
updated with the latest firmware from
Apple, it may not function properly
with the unit.
