background image

Customer Support

Customer Service:

 

1-888-999-4215

 

| Email Support:

 

prodinfo@

dpiinc.com

 

| Email Parts:

 

[email protected] 

For Warranty Information and the most up-to-date version of 
this User’s Guide, go to 

www.iLiveElectronics.com

To download this User’s Guide in English, Spanish, or French, or 
to get answers to frequently asked questions, visit the support 
section at: 

www.iLiveElectronics.com

Para descargar este Manual del Usuario en inglés, español y 
francés, o para obtener respuestas a preguntas frecuentes, 
visite la sección de apoyo en: 

www.iLiveElectronics.com

Pour télécharger ce guide de l’utilisateur en anglais, espagnol 
ou français, ou pour obtenir des réponses à des questions 
fréquemment posées, consultez la rubrique d’assistance sur: 

www.iLiveElectronics.com

Copyright © 2020 Digital Products 
International (DPI, Inc.) All other trademarks 
appearing herein are the property of their 
respective owners. Specifications are subject 
to change without notice.

FCC Warnings

WARNING: Changes or modifications to this unit not expressly 

approved by the party responsible for compliance could void the 

user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits 

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 

are designed to provide reasonable protection against harmful interference in 

a residential installation. This equipment generates, uses, and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, there is 

no guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, the user is encouraged to 

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Additional Warnings

• WARNING: To prevent fire or shock hazards, do not expose this

unit to rain or moisture.

• WARNING : Where the mains plug or appliance coupler is used

as the disconnect device, such disconnect device shall remain

readily operable.

• Lithium batteries, like all rechargeable batteries, are recyclable 

and should be recycled or disposed of according to state and local 

guidelines. They should never be disposed of in normal household

waste, and they should never be incinerated, as they might

explode. Contact your local government for disposal or recycling 

practices in your area.

Party Plus Mode

If you have another ISBW240 speaker, you can pair and play the 
two speakers together for a surround sound effect, or have two 
speakers playing in different rooms.

1. To enter Party Plus Mode, Power ON both speakers and 

make sure both units are in Bluetooth mode. 

2. Press and hold the

 Mode

 button on one of the units (this 

is now the primary unit), and the speakers will attempt to 

pair to each other. 

3. When the two speakers are paired together a voice will 

announce the connection.

4. Connect Bluetooth device to speakers using the steps 

from the “Pairing and Playing Bluetooth Audio” section 

below.

5. Use your device to select and play tracks. The audio will 

now be heard through both speakers.

6.  The primary unit will control both speakers when 

connected. To disconnect the speakers, press the Mode 

button on the primary unit.

Note: To use Party Plus Mode, please make sure that you 

connect the speakers before pairing to your Bluetooth 

device. You will not be able to connect the speakers if you 

are already paired to a Bluetooth device.

WARNING: This product can expose you to chemicals 

including lead, which is known to the State of California to 

cause cancer and birth defects or other reproductive harm. 

For more information go to www.P65Warnings.ca.gov. 

This product meets and complies with required Federal 

product guidelines.

Made 

  Green

Pairing & Playing Bluetooth Audio 

1. When first powered on, the speaker defaults to Bluetooth 

Mode and is ready to pair automatically. When pairing, 

remain within 3 feet of the Bluetooth device.

2. Using the controls on your Bluetooth device, select 

ISBW240

 in the Bluetooth settings to pair. 

If need be, 

refer to the user’s manual for your specific device for more 

information.

3. When successfully paired, a voice prompt will announce 

the connection. Your Bluetooth device will now be heard 

through the speaker.

4. Use the controls on the connected Bluetooth device to 

select and play audio. Use the speaker controls or the 

connected Bluetooth device to play, pause, and adjust 

the volume level.

5. After initial pairing, the speaker will automatically 

connect to the last Bluetooth device used whenever it is 

in Bluetooth Mode. 

Note:

 If your device should become 

unpaired or you find it is unable to connect, press and 

hold the button   to enter to Pairing Mode. A voice 

will announce, “Bluetooth is connecting,” and you can 

connect to the speaker manually.

If after you have connected the two speakers, you decide 

you want to use one of the speakers independently:

1. Press and hold the Mode button on the speaker you 

want to use to disconnect the two speakers.

2. Press and hold   button on the speaker, the speaker will 

then enter into pairing mode. You can now connect to 

the speaker manually.

If you want to connect the speakers together again:

1. Access your device’s Bluetooth settings menu and select 

all ISBW240s.

2. Select “forget this device” and follow the Party Plus mode 

connection procedure listed in the user manual.

FM Radio

An FM receiver is built into the speakers. Adjust the position of 

the speaker to improve FM radio reception.

1.  Once powered ON, press the 

Mode

 button to switch to 

FM Radio Mode.

2.  Press and hold 

Pair

 button for 2 seconds to scan and 

save radio stations automatically.

3.  Press and hold the 

+/-

 buttons to cycle through saved 

stations.

ISBW240BDL-2863-01-IB.idml   2

3/09/2021   9:05:52 AM

Reviews: