background image

2

WARNING: Changes or modifications to this unit not 

expressly approved by the party responsible for compliance 

could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with 

the limits for a Class B digital device, pursuant to Part 15 of the FCC 

Rules. These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. This 

equipment generates, uses, and can radiate radio frequency energy 

and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, 

there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to 

radio or television reception, which can be determined by turning 

the equipment off and on, the user is encouraged to  try to correct 

the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

FCC Warnings

•  CAUTION

: TO PREVENT ELECTRIC SHOCK, 

MATCH WIDE BLADE OF PLUG TO WIDE SLOT, 

FULLY INSERT.

•  WARNING: 

Apparatus shall not be exposed to dripping 

or splashing and no objects filled with liquids, such as 

vases, shall be placed on the apparatus.

•  AVERTISSEMENT:

 L’appareil ne doit pas être exposé 

à des gouttes ou éclaboussures et aucun objet rempli 

de liquides, tels que des vases, ne doit être placé sur 

l’appareil.

•  CAUTION:

 Use of any controls or adjustments or 

performance of procedures other than those herein 

specified may result in hazardous radiation exposure.

•  WARNING:

 Changes or modifications to this unit 

not expressly approved by the party responsible for 

compliance could void the user’s authority to operate the 

equipment.

•  WARNING:

 Do not place the unit on top of any soft, 

porous, or sensitive surfaces to avoid damaging the 

surface. Use a protective barrier between the unit and 

surface to protect the surface.

•  WARNING:

 Use of this unit near fluorescent lighting 

may cause interference regarding use of the remote. If 

the unit is displaying erratic behavior move away from 

any fluorescent lighting, as it may be the cause.

•  WARNING

: Shock hazard - Do Not Open.

•  AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS 

OUVRIR

AC/DC adapter is a disconnect device. The AC/DC adapter 

should not be obstructed OR should be easily accessed during 

intended use.

L’adaptateur secteur est un dispositif déconnecté. Il ne doit 

pas être obstrué OU doit être facilement accessible lors de 

l’utilisation prévue.

Warnings and Precautions

The lightning flash with arrowhead symbol, 

within an equilateral triangle, is intended to 

alert the user to the presence of uninsulated 

"dangerous voltage" within the product's 

enclosure that may be of sufficient magnitude to 

constitute a risk of electric shock to persons.

WARNING

: TO REDUCE THE RISK 

OF ELECTRIC SHOCK, DO NOT 

REMOVE COVER (OR BACK). 

NO USER-SERVICEABLE PARTS 

INSIDE. REFER SERVICING TO 

QUALIFIED SERVICE PERSONNEL.

ATTENTION

RISQUE D' ÉLECTROCUTION

NE PAS OUVRIR

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The exclamation point within an equilateral 

triangle is intended to alert the user to 

the presence of important operating and 

maintenance (servicing) instructions in the 

literature accompanying the appliance.

Meijer.com

Summary of Contents for ISB311B













Reviews: