background image

2

Warnings and Precautions

WARNING:

 Use of this unit near fluorescent lighting may cause interference regarding use of the remote.  

If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.

WARNING:

 

To prevent fire or shock hazards, do not expose this unit to rain or moisture.

Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.

WARNING: 

The remote control’s button cell battery contains mercury.  Do not put in the trash, instead 

recycle or dispose of as hazardous waste

CAUTION:  

Danger of explosion if battery is incorrectly replaced. Replace only with the same or 

equivalent type.

PRÉCAUTION: 

Danger d’explosion si les piles sont remplacées de façon incorrect. Remplacer les piles 

seulement par le même type de pile ou l’équivalent.

WARNING:

 Changes or modifications to this unit not expressly approved by the party responsible for 

compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 

of the fCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee 

that interference will not occur in a particular installation.  If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off and on, the user is encouraged to  try to correct 

the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

This symbol, located on back or 

bottom of the unit, is intended to alert 

the user to the presence of uninsulated 

“dangerous voltage” within the 

product’s enclosure that may be of 

sufficient magnitude to constitute a 

risk of electric shock to persons.

This symbol, located on back or 

bottom of the unit, is intended to alert 

the user to the presence of important 

operating and maintenance (servicing) 

instructions in the literature 

accompanying the appliance.

CAUTION

: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, 

fUllY InSeRT.

To reduce the risk of electric shock, do not remove cover (or back).  There are no user-serviceable parts 

inside.  Please refer any servicing to qualified service personnel.

Summary of Contents for IS809B

















Reviews: