background image

This symbol, located on back or bottom of the unit, is 

intended to alert the user to the presence of uninsulated 

“dangerous voltage” within the product’s enclosure that 

may be of sufficient magnitude to constitute a risk of 

electric shock to persons.

This symbol, located on back or bottom of the unit, is 

intended to alert the user to the presence of important 

operating and maintenance (servicing) instructions in 

the literature accompanying the appliance.

CAUTION

: TO PREVENT ELECTRIC SHOCK, 

MATCH WIDE BLADE OF PLUG TO WIDE SLOT, 

FULLY INSERT.

To reduce the risk of electric shock, do not remove 

cover (or back).  There are no user-serviceable parts 

inside.  Please refer any servicing to qualified service 

personnel.

WARNING:

 Changes or modifications to this unit 

not expressly approved by the party responsible for 

compliance could void the user’s authority to operate 

the equipment.

NOTE: This equipment has been tested and found to 

comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits 

are designed to provide reasonable protection against 

harmful interference in a residential installation. This 

equipment generates, uses, and can radiate radio 

frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful 

interference to radio communications. However, there 

is no guarantee that interference will not occur in a 

particular installation.  If this equipment does cause 

harmful interference to radio or television reception, 

which can be determined by turning the equipment 

off and on, the user is encouraged to  try to correct the 

interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and 

receiver.

•  Connect the equipment into an outlet on a circuit 

different from that to which the receiver is 

connected.

•  Consult the dealer or an experienced radio/TV 

technician for help.

Warnings and Precautions

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO 

RAIN OR MOISTURE.

Summary of Contents for IS108B













Reviews: