Docking an iPod
6
1. Locate the numbered
Bracket
that fits the iPod that will be docked.
Each included Bracket has a number on it, indicating which iPod model that
bracket is compatible with. See the separate bracket chart page to identify which
bracket is needed.
. Press the
Open/Close Button
to open the CD/iPod door on the unit.
3. Snap the
Bracket
into place over the iPod connector in the
Dock for iPod
.
All Brackets will only fit one way onto the Dock.
When inserting an iPod nano (first or second generation), slide the Dock
connection on the unit so that it matches the opening on the iPod nano (first or
second generation).
4. Connect the iPod to the iPod connector inside the
Dock for iPod
.
Once an iPod is connected to the
Dock for iPod
, the unit will play and charge the
docked iPod.
Playing a docked iPod
1. Dock an iPod onto the
Dock for iPod
by following the “Docking an iPod”
instructions.
. Press the
Standby Button
to turn the unit on.
3. Press the
iPod Button
to switch the unit to iPod mode.
4. Press the
Play/Pause/Mem Up Button
to play the docked iPod.
