CUstOmeR HeLPLINe | 1-314-621-2881
iLive | ID200B
15
You will need all of the following.
•
Computer connected to the Internet.
•
CD drive that is capable of reading and writing CD disk
•
Blank CD-R or CD-RW disc.
1. Go to www.ilive.net and click on the support tab. Then select ID200B from
the list of products.
2. Select DOWNLOADS, then click on the most recent firmware update and save
file to your computer.
3. Load a blank CD into a CD writable drive.
4. Copy and Paste or Drag and Drop firmware file to CD drive, and write (burn)
file to CD.
1. Power on DVD player.
2. Press the
oPen/close
button to open the
disc draWer
. Insert the firm-
ware disc. Press the
oPen/close
button to close the
disc draWer
.
The DVD player will read disk and automatically begin update process. The up-
date process will take several minutes.
3. The DVD player will automatically power off when the update is complete.
4. Once update is complete, power on the DVD player and remove update disk.
5. Press the
setuP
button to access the system setup menu.
6. Select “Default Reset” and press the
enter
button.
7. Your DVD player is now updated.
The following events may cause the writing of the firmware update to the player to be halted and the
player to no longer operate properly.
•
DO NOT unplug the power cord during the firmware update process.
•
Avoid loss or interruption of power during the firmware update process.
•
DO NOT press the power button on the unit during the firmware update process.
•
Check the firmware update disc for dirt or scratches before beginning the firmware update process.
Preparation
creating a firmware disk
installing updates
