8
Customer Support: 1-888-999-4215
9
Plug the attached AC cord into a
standard AC power outlet to power the
unit.
Power
Setup
Clock and Alarm
Manually setting the Clock
setting the Clock
setting the sleep Timer
Cancelling the Alarm
After the Alarm sounds
setting the Alarms
1. Press the PoWeR button to turn
the clock radio off.
2. Press and hold the ClK ADJ
button.
The time will begin to blink.
3. While holding the ClK ADJ button,
press the HR/MIn buttons to
adjust the hour and minute.
4. Release the ClK ADJ button to
finish setting the time.
1. Follow the instructions for Docking
an iPod or iPhone.
2. Press and hold the ClK ADJ button
for 3 seconds then release.
3. The time will automatically sync
with the set time on the docked
iPod or iPhone.
1. Press the PoWeR button to turn
the clock radio on.
2. Press the snooZe button
repeatedly to set the sleep timer.
The sleep timer will appear on the
display.
3. When the set sleep time expires,
the clock radio will automatically
power off.
1. Press the Al1 or Al2 buttons to
turn alarm 1 and alarm 2 off or on.
The AL1 or AL2 indicators on the LCD
display will appear when alarm 1 or
2 is active.
After the alarm sounds:
Press the Al oFF button to turn the
alarm off until the set alarm time is
reached again.
or
Press the snooZe button to delay the
alarm for an additional 9 minutes.
1. Press the PoWeR button to turn
the clock radio off.
2. Press and hold the Al1 or Al2
button.
3. While holding the Al1 or Al2
button, press the HR/MIn buttons
to adjust the hour and the minute.
4. While continuing to hold the Al1
or Al2 button, press the soURCe
button to adjust the alarm source.
Buzz - Wake to Buzzer
Tune FM - Wake to the FM radio
iPod - Wake to a docked iPod
5. Release the Al1 or Al2 button to
finish setting the alarm.