To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de
apoyo en:
www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to
www.iLiveElectronics.com
Customer Service:
1-888-999-4215 |
Email Support:
Email Parts:
Copyright © 2020 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners.
Specifications are subject to change without notice.
Customer Support
Protect for Today
Sustain for Tomorrow
Made
Green
Aux In
Requires a 3.5mm audio cable.
1. Connect a 3.5mm
audio cable to the
Aux
In
on the unit and the
audio output
on an
audio device.
2. The Boombox will
automatically switch
to Aux mode.
3. Use the controls on the
connected device to
select and play audio.
Be sure the volume on
your connected device is audible when you begin playing.
SOURCE /
/ VOL +
EQ / LIGHTS
MIC
USB
AUX IN
DC IN
OFF / ON
POWER
/ VOL –
/ FM SCAN / CONNECT
USB
1. Load a USB drive into
the
USB Media port.
The boombox will
automatically switch to
USB Mode, indicated
by a voice prompt, and
begin playing media on
the drive.
2. Use the controls on the
boombox to select and
play audio from the
connected drive.
FM Radio
Radio Reception
An FM receiver is built into the boombox. Adjust the position of the boombox to
improve FM radio reception.
Radio Tuning and Saving Station Presets
1. Press the
Source
button to select
FM Radio Mode,
indicated by a voice
prompt.
2. Press the
button to scan and save radio stations automatically.
3. Press the
buttons to cycle through saved radio stations.
SOURCE /
/ VOL +
EQ / LIGHTS
MIC
USB
AUX IN
DC IN
OFF / ON
POWER
/ VOL –
/ FM SCAN / CONNECT
Charging the Battery
To charge the internal battery, plug the USB charging cable into the
DC Power
Input
on the speaker and a USB power adapter (not included) and standard power
outlet. Charging time is approximately 5 hours. Battery life is approximately 10
hours at 50% volume. Battery life can be extended by playing at lower volume
levels.
SOURCE /
/ VOL +
EQ / LIGHTS
MIC
USB
AUX IN
DC IN
OFF / ON
POWER
/ VOL –
/ FM SCAN / CONNECT
Bluetooth Wireless
Pairing & Playing Audio
When first powered on, the boombox defaults to Bluetooth Mode, indicated by a
voice prompt.
1. Power ON the boombox by adjusting the Power Switch to the ON position.
The boombox defaults to Bluetooth Mode and is ready to pair automatically.
When pairing, remain within 3 feet of the Bluetooth device.
2. Using the controls on your Bluetooth device, select
IBB520
in the Bluetooth
Settings to pair. If need be, refer to the user’s manual for your specific device
for more information.
3. When successfully paired, a voice will announce, “Bluetooth is connected.”
Your Bluetooth device will now be heard through the boombox.
4. Use the controls on the connected Bluetooth device to select and play
audio. Use the boombox controls or the connected Bluetooth device to
play, pause, and adjust the volume level.
5. After initial pairing, the boombox will automatically connect to the last
Bluetooth device used whenever it is in Bluetooth Mode.
Note:
If your
device should become unpaired or you find it is unable to connect, press
& hold the button to enter to Pairing Mode. A voice will announce,
“Bluetooth is connecting,” and you can connect to the boombox manually.
Party Plus Mode.
1. To enter Party Plus Mode, Power ON both boomboxes and set to Bluetooth
mode.
2. Press and hold the
button on one of the units
for approx. 4 seconds,
“BU” will show on the display and the boomboxes will attempt to pair to
each other.
3. When the 2 boomboxes are paired together a voice will announce the
connection.
4. Connect Bluetooth device to boomboxes using the steps from the
“Pairing
and Playing Audio”
section above.
5. Use your device to select and play tracks. The audio will now be heard
through both boomboxes.