LED Light Strip
User’s Guide for Model IAT151 v2799-01
Back of TV or Monitor
Fold at corners as shown.
Features
•
Length: 15 ft/4.5M
•
Width: .4 in/10mm
•
90 LEDs total (5050 RGB LED)
•
5V USB power input
•
Self adhesive, double sided backing
Includes
•
USB cable with built-in remote receiver
•
Remote control with CR 2025 battery included
Installation
1. Clean the surface to which you’re going to attach the light strip. The example shown below represents the
back of a TV or computer monitor.
2. Peel the backing strip off the adhesive tape on the LED strip.
3. Press and hold the LED strip to the surface.
4. Connect the USB cable to a USB port on the TV or monitor, or a USB power adapter (not Included).
5. Use the remote to change LED color, brightness, and flash settings.
•
The remote receiver does not need to be visible or have direct line of sight with the remote, and can be
fully hidden behind your TV, monitor, etc.
•
You may cut the strip to fit smaller areas. Using scissors, cut on the visible line between LEDs.
Connect USB plug
to an available USB
outlet or a USB power
adapter (not included)
The remote receiver is built
into the USB power cable.
