background image

2

SAFETY WARNINGS

•  WARNING: Where the mains plug 

or appliance coupler is used as the 

disconnect device, such disconnect 

device shall remain readily operable.

•  Risk of electric shock. Grounding 

continuity must be maintained.

•  Lithium batteries, like all rechargeable 

batteries, are recyclable and should 

be recycled or disposed of according 

to state and local guidelines. They 

should never be disposed of in normal 

household waste, and they should 

never be incinerated, as they might 

explode. Contact your local government 

for disposal or recycling practices in 

your area.

•  Only use the included power supply or 

a UL/ETL certified power supply of the 

same power output specifications.

•  To avoid hearing damage, make sure 

that the volume on your music player 

is turned down before connecting your 

headphones. After placing headphones 

in/on your ears, gradually turn up the 

volume until you reach a comfortable 

listening level.

FCC WARNINGS

WARNING: To assure continued operation, 

follow the attached installation instructions 

and use only shield cables when connecting 

to other devices. Changes or modifications 

not expressly approved by the party 

responsible for compliance could void the 

user’s authority to operate the equipment.
NOTE: This equipment has been tested and 

found to comply with the limits for a Class 

B digital device, pursuant to Part 15 of the 

FCC Rules. These limits are designed to 

provide reasonable protection against harmful 

interference in a residential installation. 

This equipment generates, uses, and can 

radiate radio frequency energy and, if not 

installed and used in accordance with the 

instructions, may cause harmful interference 

to radio communications. However, there is 

no guarantee that interference will not occur 

in a particular installation. If this equipment 

does cause harmful interference to radio or 

television reception, which can be determined 

by turning the equipment off and on, the 

user is encouraged to try to correct the 

interference by one or more of the following 

measures:

•  Reorient or relocate the receiving 

antenna.

•  Increase the separation between the 

equipment and receiver.

•  Connect the equipment into an outlet on 

a circuit different from that to which the 

receiver is connected.

•  Consult the dealer or an experienced 

radio/TV technician for help.

WARNING:

 This product can 

expose you to chemicals including 

lead, which is known to the State of 

California to cause cancer and birth 

defects or other reproductive harm. 

For more information go to: www.

P65Warnings.ca.gov 

This product 

meets and complies with all 

Federal regulations.

Summary of Contents for IAHRF79

















Reviews: