Charging the Case
The earbuds have a total battery life of
approximately 5 hours at 50% volume with
ANC off. To charge the case, use the
USB-C
to USB
cable (included), to connect to the
USB port of a powered on computer or
USB power adaptor (not included). When
the case is charging the
Power Indicator
LED
will flash red. When fully charged the
LED will turn red. The total charge time is
approximately 2 hours.
Truly Wire Free Earbuds
User’s Guide for Model IAEBT411 v2714-01
Function Touch Pad
Note: The Function Touch Pad is sensitive and must be touched or
tapped to operate properly.
Tap and hold for 5 seconds to power ON/OFF.
Tap to play/pause music.
Tap to answer/end phone calls.
Tap and hold for 2 seconds to reject incoming calls.
Tap and hold for 2 seconds to activate Voice Assistant (LEFT).
Press and hold for 3 seconds to switch modes between: Normal, Transparent, and ANC (RIGHT).
Quickly tap twice to skip to next track (RIGHT ).
Quickly tap twice to play previous tracks (LEFT).
Quickly tap three times to turn volume up (RIGHT).
Quickly tap three times to turn volume down (LEFT).
Charging Contacts
Charging Contacts
Power Indicator
LED
Charging the Earbuds
1. Open the cover and place the earbuds on the charging contacts.
Be sure to match the left and right earbuds with the correct
docking station in the case.
2. When charging, the
Power Indicator LED
on the bottom of the
case will turn blue. When charging is complete, the indicator LED
will turn off.
3.
Earbud Indicator LED
will turn red when charging. When fully
charged, the LEDs will turn off.
Earbud Indicator LED/Microphone
Red when charging.
Lights off when fully charged.
NOTE: Each earbud must
be powered on separately.
