Overview & Controls
Features
• Supports Bluetooth
• Wireless range: 33 feet
• Supports profile A2DP (Advanced Audio
Distribution Profile)
• Voice prompts announce earbud operations
• Digital volume control
• Micro-USB port for battery recharge
• DC battery power: built-in rechargeable lithium
ion battery
Includes
• 3 pairs of eartips: 1 small, 1 medium, 1 large
• Micro-USB to USB charging cable
Charging the Battery
Initial charge time is approximately 2 hours. Charge
fully before use. The low battery indicator will flash for
1 minute and a voice will announce “Low Battery,” then
the unit will automatically power OFF.
• Using a Micro-USB to USB cable (included),
connect to the USB port of a powered on
computer or USB power adaptor to charge.
Power Status
Indicator Light
Power ON
Flashing blue light
Low Battery
Flashing red light
Charging
Solid Red light
Finished Charging
Solid Blue light
Bluetooth Status
Indicator Light
Pairing Bluetooth
Flashing red and blue lights
Successfully Paired
Slowly flashing blue light
Initial Bluetooth Connection
1. With the earbuds powered OFF, press and hold
until they power ON and the indicator light
begins flashing red and blue.
When pairing, remain
within 3 feet of the Bluetooth device.
2. Using the controls on your Bluetooth device,
select IAEB07 in the Bluetooth Settings to pair.
If need be, refer to the user’s manual for your specific
device for more information.
3. When successfully paired, a voice will announce
“Bluetooth is connected” and the LED indicator
will begin slowly flashing blue. Audio from the
connected Bluetooth device will now be heard
through the earbuds.
4. Use the controls on the connected Bluetooth
device to select and play audio. Use the earbud
controls or the connected Bluetooth device to
play, pause, and adjust the volume level.
5. After initial pairing, press and hold
for
approximately 5 seconds. The earbuds will
power ON and automatically connect to the
Bluetooth device.
Previously Connected Devices
• The earbuds can remember multiple Bluetooth
devices and will always try to re-connect to the
last device used.
• To re-connect to a different device, turn off
Bluetooth on unwanted devices, then access the
Bluetooth settings menu on the device you wish
to use and select IAEB07.
Using the Speakerphone
1. To accept a call, press the
button or use the
controls on the connected phone.
2. To end a call, press the
button or use the
controls on the connected phone.
3. To re-dial the last dialed number, press the
button twice.
Troubleshooting
If the earbuds should become unpaired or will not
connect normally, follow these steps in your device’s
Bluetooth Settings Menu.
1. Delete the earbuds (“Forget This Device”).
2. Turn Bluetooth OFF then ON again, and repeat the
Initial Bluetooth Connection steps.
Volume Down
Volume Up
LED Indicator inside
body of controller
Power + Pair
Press and hold until
flashing red/blue light.
Power ON/OFF
Press and hold for 5 sec.
Play / Pause /
Speakerphone
Press to play/pause audio
or answer/end a phone call.
Microphone
