8
9
█ USING THE AUXILIARY INPUT
1.
Connect an MP3 Player or other audio
source to the
Auxiliary Input
.
2.
Press the
Power Button
to turn the unit
on.
3.
Press the
Source Button
to switch the
unit to
Aux Mode.
Use the connected device’s controls to
control the audio playing through the unit.
█ TUNING THE AM/FM RADIO
1.
Press the
Power Button
to turn the unit
on.
2.
Press the
Source Button
to switch the
unit to
Tuner Mode
. "Tuner" will appear
on the LCD Display, indicating that the
unit is in Tuner Mode.
3.
Press the
Source Button
to switch to
AM
or
FM radio mode
.
4.
Press the
Skip/Tune Buttons
to tune the
AM or FM radio stations.
5.
Press and hold the
Skip/Tune Buttons
for
3 seconds to search for a receptive AM or
FM radio station.
6.
Press the
St./Mono Button
to turn the
FM Stereo Mode
off and on .
7.
Adjust the
FM Wire Antenna
to improve
FM radio reception. An AM antenna is
built into the unit. Adjust the position of
the unit to improve AM radio reception.
OPERATIONS
█ SAVING AN AM/FM RADIO
STATION TO THE UNIT'S MEMORY
1.
Tune the AM/FM Radio to the desired
station.
2.
Press the
Mem/Clk Adj Button
.
3.
Press the
Stop/Mem+ Button
to select
a memory channel for the current radio
station.
4.
Press the
Mem/Clk Adj Button
.
5.
To cycle through saved radio stations,
Press the
Stop/Mem+ Button.
█ SETTING THE CLOCK
1.
Press the
Power Button
to turn the unit
off.
2. The
Power Indicator Light
will
illuminate red, indicating that the unit is
in Standby Mode.
3.
Press the
Mem/Clk Adj Button
.
4.
The Hour will begin to blink.
5.
Press the
Skip/Tune Buttons
to adjust
the hour.
6.
Press the
Mem/Clk Adj Button
to set the
hour.
7.
The Minute will begin to blink.
8.
Press the
Skip/Tune Buttons
to adjust
the minute.
9.
Press the
Mem/Clk Adj Button
to set the
minute, and finish setting the clock.
█ SETTING THE TIMER
1.
To set the timer, you must first go through
the steps of Setting the Clock.
2.
After the clock is set, "Timer" will appear
on the LCD Display and the timer hour
will begin to blink, indicating that you are
now editing the timer.
3.
Press the
Skip/Tune Buttons
to adjust
the hour.
4.
Press the
Mem/Clk Adj Button
to set the
hour.
5.
The Minute will begin to blink.
6.
Press the
Skip/Tune Buttons
to adjust
the minute.
7.
Press the
Mem/Clk Adj Button
to set the
minute, and finish setting the timer.
8.
After setting the timer, press and hold
the
Mem/Clk Adj Button
to activate
the timer. The word "Timer" will appear
on the LCD display once the timer is
activated.
OPERATIONS