10
9
Programming the MCP-400 Modulators
Programming the MCP-400 Modulators
SPI-300 / MCP-400 -D-
(GB)
4. THE DIVERS SCREENS
It is one screen that befit an operation that has already described in the Basic Handling
guide : Use of Configurations.
4.1 - The Configurations Screen
On pages 12/13 of the Basic Handling guide was defined what is a module
configuration, were indicated the advantages of its use and were described the
processes of creation and utilization through the screens that appear when you
select the
Save
and
Recall
commands in the
General
menu. Therefore it is not to
add more information.
3. THE INFORMATION SCREENS
They provide information about working of the connected module. Information is
distributed in two screens which are related to the two options of the
Info
menu:
Alarms
and
Details
.
3.1 - The Alarms Screen
Informs about the existence of failures in the internal components of the module or
bad processing of the signal. Character "X" warns there is an alarm situation and "0"
means the status or working are correct:
ALARMS
Status
: 0
Hardware:
: X
OK
Use the OK command (key ) to close the screen.
3.2 - The Details Screen
This screen identifies the module and displays outstanding data :
Use the OK command (key ) to close the screen.
MCP-421 F01.02
OK
IKUSI - Ángel Iglesias, S.A.
Paseo Miramón, 170
20009 San Sebastián
SPAIN
Tel.: +34 943 44 88 00
Fax: +34 943 44 88 11
www.ikusi.com
