IKUSI MAC HOME AV-COFDM, User Manual

Page: 7 / 20

7
Unit installation and configuration
The LCD display and the control button are sufficient for the basic settings of the unit. Follow the
steps indicated below to install the unit and configure the various parameters accessible from the
user interface on the LCD display.
Installation
RISK of DAmAGE To THE UNIT
Mechanically handling the unit may result in
damage. Do not connect the unit to the power
supply before or during assembly.
1) Mount and tighten the screws and plugs to secure
the unit to the wall. (*)
2)
Connect the AV input in the respective RCA con-
nectors or S-Video connector.
3) Optionally, connect the loop-through RF input
coaxial cable (F connector).
4)
Connect the coaxial output cable to the unit (F
connector).
(*) The 3 wall attachments are supplied disassembled in order
to install the unit horizontally. The straightforward assembly
consists of positioning the fastenings in the corresponding
holes and pushing as far as possible (they cannot be remo-
ved once inserted).
NoTE.
It is recommended to mount the unit vertically.
Power supply connection
DANGER of DEATH oR INJURY
Incorrect unit power connection may cause an electric shock. Follow the steps below for
the electrical installation of the unit.
1) Connect the earth cable.
2) Connect the power plug to the unit mains connector.
3)
Connect the power plug to the mains socket.
ATTENTION
DANGER
vídeo
audio
L
audio
R
S-
V
ideo
Ref.4488
AV COFDM MODULATOR
USB
1
DVD IRD CAM
2
3 4