background image

17

USB Player

NOTE

. This device is used to play back videos through the USB port. Using the soft-

ware, the user can draw up a personalised list of images and videos in order to create 
the end file (“video-final.ts”), which can then be played back through the MAC-HD 
modulator.

Check the firmware version of the unit, USB PLAYER option, available as of version 1.21

.

Software to create videos for playback through the MAC-HD.

Users should install the software on their PC by downloading the setup file “conversor-mac-insta-

ller.exe” from the MAC-HD webpage at http://www.ikusi tv/en/headends/modulators/mac-series/

mac-hd.

USB Player Video playback

Playback will begin automatically when you insert the pen drive in the MAC-HD Modulator’s USB 

connector (wait for a seconds), without you having to access the menu, provided the “video-final.ts” 

file was created properly. 
The USB PLAYER function overrides the modulator function. If the MAC-HD is working as a modu-

lator, it will automatically playback the video.ts file on any pen drive you connect.

 

NOTE

The modulator generates a signal for 2 services even though we have one input selec-
ted. This allows the TV to memorize the 2nd service which is destined to a future emplo-
yment of the USB flash drive. 
With this we would avoid TV rescanning if the first installation was made without using 
the USB flash drive.

NOTE

In case of connecting only the USB flash drive, the input mode must be “2xCVBS”.

TABLE OF DEFAULT PARAMETERS FOR SELECTED COUNTRY

COUNTRY

LANGUAGE

NIT mode

LCN mode

NID

TSID

ONID

Bandwidth

Channel

Frequencies

Australia

English

ON

Generic

1

38

100

7 MHz

38

599 MHz

France

French

ON

Europe

1

21

8442

8 MHz

21

474 MHz

UK

English

ON

IndTlCom(UK)

1

21

9018

8 MHz

21

474 MHz

Italy

Italian

ON

Europe

1

21

1

8 MHz

21

474 MHz

Portugal

English

ON

Generic

1

21

8904

8 MHz

21

474 MHz

Spain

Spanish

ON

OFF

1

21

100

8 MHz

21

474 MHz

Note: When configuring the country settings, the equipment is always configured with the first of the permitted channels, whilst the 
frequency will be that of the centre channel.

Summary of Contents for MAC-HD

























Reviews: