2
Getting started
1.
Charging the receiver
IKBT12 comes with a built-in rechargeable battery, prior to using it, it is recommended to
charge the battery fully for the first time.
When the receiver is low power, red LED flashes once and the receiver emits three tones
every 20 seconds. Please recharge the battery of the receiver.
Connect the charger to a standard power outlet and the charger plug to the charging jack of
the receiver. Red LED is on while charging. It takes about 2.5 hours to charge the battery
fully. When charging has completed, red LED will be off.
Remarks:
1)
If the receiver can’t be turned off, you can charge it to turn it off.
2)
Please don’t attempt to take out the battery from the speaker, as this might damage it.
Warning:
1)
The battery is recyclable.
2)
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place,
such as sunshine, fire or the like.
2.
Turning on/off the receiver
Function
Operation
LED indicator
Power on
Press and hold
MFB
button for 3
～
5 seconds
Blue LED is on for 1 second
Power off
Press and hold
MFB
button for 3
～
5 seconds
Red LED is on for 1 second