Function
Operation
LED
indicator
Indication
tone
Switching
off
IKBT11
Press and hold
button for 4
～
5
seconds, and release
it when the red LED
flashes
Red LED
flashes 3 times
quickly
One tone
Entering
pairing
mode
Ensure IKBT11 is
off, press and hold
button for about
7
～
8 seconds and
release it when red
and blue LEDs flash
alternately
Red and blue
LEDs flash
alternately
Two tones
Remark:
Pairing mode will last 2 minutes. IKBT11 will switch to standby
mode automatically if it can’t be connected to any device after 2 minutes. If
you want to continue pairing IKBT11 with a Bluetooth device, please switch
off IKBT11 first and enter pairing mode again.
2.
Pairing IKBT11 with a Bluetooth cell phone
Please make sure your cell phone is Bluetooth-enabled. Specific pairing steps
may vary with different cell phones. Please refer to your cell phone’s user’s
manual for further information. The general pairing steps are as follows:
1)
Keep IKBT11 and Bluetooth cell phone within 1 meter when pairing;
2)
Enter IKBT11’s pairing mode (please refer to “Switch on/off IKBT11);
3)
Switch on the cell phone’s Bluetooth function and search for Bluetooth
devices. After the search is completed, select “IKBT11” from the
Bluetooth device list;
4)
According to the indication, enter password or PIN No:”0000”, and
press ” Yes” or “confirm”;
5)
After successful pairing, select “IKBT11” from the Bluetooth device list
and press “connect”;
6)
After successful connecting, the blue LED will flash once every 30
seconds.
4
Remarks:
