Ikra IMH 2500, Translation Of The Original Instructions

Page: 20 / 78

18
EC DECLARATION OF CONFORMITY
We, ikra GmbH, Schlesierstrasse 36, D-64839 Müns-
ter, GERMANY, declare under our sole responsibility that
the Electric garden shredder IMH 2500 , to which this
declaration relates correspond to the relevant basic safety
and health requirements of Directives
2006/42/EC (EC Machinery directive)
2014/30/EU (EMC directive)
2000/14/EG+ 2005/88/EG (noise directive)
2011/65/EU (RoHS directive)
For the relevant implementation of the safety and health
requirements mentioned in the Directives, the following
standards and/or technical specifcation(s) have been
respected:
EN 60335-1:2012+A11:2014
EN 50434:2014
EN 62233:2008
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-11:2000
EN 50581:2012
Conformity assessment procedure according 2000/14/EC
amended by 2005/88/EC to Annex V.
Measured sound power level 103,8 dB (A)
Guaranteed sound power level 106 dB (A)
The year of manufacture is printed on the nameplate and
can be additionally retrieved via the consecutive serial
number.
Münster, 2020-03-26
Matthias Fiedler
Senior Product Manager
Ikra GmbH
Maintenance of technical documentation:
Matthias Fiedler, Ikra GmbH, Schlesierstrasse 36,
64839 Münster, Germany
FAILURE REMOVAL
Failures Causes Removal
Engine does not start No power supply. Check the socket outlet, cable, line
and plug, and carry out repairs by a
qualifi ed electrician if necessary
overload protection has responded wait until motor has cooled down,
press reset switch and switch on
again
housing cover is not closed properly Screw down the housing lock
garden waste is not collected shredded material is too soft work with a pusher or dry twigs/
branches for shredding
device is blocked clear the blockage, see picture
description
shredded material in ejection chute remove shredded material from the
ejection chute
device does not shred satisfactorily blades are worn out check the blades and, if necessary,
reverse or replace them
EN
ENGLISH