GB
| Operating Instruction
also consider the working conditions
and the work to be carried out.
The use of
power tools for purposes other than those
intended for the respective tool may result
in dangerous situations.
5) Appropriate handling and use of bat-
tery-operated power tools
a) Make sure that the device has been
switched off before inserting the battery.
Inserting a battery into a switched-on power
tool may lead to accidents!
b) Only use charging devices recommend-
ed by the manufacturer to charge the
batteries.
Charging units are usually de-
signed for certain types of batteries; if used
with other types there is a risk of fire!
c) Only use batteries designed for your
power tool.
The use of other batteries may
lead to injury and risk of fire!
d) Keep unused batteries clear of paper
clips, coins, keys, nails, screws or other
small metal objects that may bridge
the contacts.
A short circuit between the
battery contacts may lead to burns or fire!
e)
Improper use may result in fluid leaking
out of the battery. Avoid any contact
with battery fluid. Flush with water in
case of contact. If battery fluid should
get into your eyes seek medical advice
additionally.
Leaking battery fluid may lead
to irritations of the skin or burns!
6) Service
a) Have the power tool serviced by qual-
ified technical personnel only; repairs
should be carried out using exclusively
original spare parts.
This will ensure the
safe operation of the power tool.
Safety instructions for grass- and shrub
shear:
-
Keep all parts of your body away from the
cutting blades. Do not try to remove cut-off
matter with the tool running. Do not try to
hold material to be cut off with your hand.
Remove cut-off matter that is stuck be
-
tween the blades only with the tool being
switched off!
When working with hedge trim-
mers even a short moment of inattentiveness
may result in severe injury.
-
Carry the hedge trimmer at the handle with
the cutting blades standing still. Always
put on the protection cover when trans-
porting or storing the hedge trimmer.
Care-
ful handling reduces the risk of injury through
the cutting blades.
-
Only hold the power tool on the insulated
handle surfaces, because the cutting blade
can come into contact with concealed pow-
er lines.
If the cutting blade comes into contact
with an energised line, device parts can be-
come energised and cause an electric shock.
-
Before starting work, search the hedge
for concealed objects, e.g. wire, etc.
Pay
careful attention to ensure that the cutting tool
does not come into contact with wire or other
metal objects.
-
Hold the power tool properly, e.g. with
both hands on the handles, if two handles
are present.
Losing control of the device can
result in injuries.
Grass shears safety warning
• This product is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge.
• This machine may cause serious injuries.
Please read the instruction manual careful-
ly as to the correct handling, the prepara-
tions, the maintenance and the proper use
of the hedgetrimmer. Familiarize yourself
with the machine before the first use and
also have yourself introduced to practical
use of the machine.
• The cutting tool continues to run after the
device is switched off.
•
Turn off power before cleaning.
•
Beware! Keep your fingers away from the
cutting area!
• Only switch on the device if your hands
and feet are away from the cutting tools.
• Remove all debris from the working area
before use and pay attention to such de-
bris while working!
•
Turn the machine off before transporting
and wait until the blade stops moving.
Maintenance and cleaning should be per-
formed only when the machine is turned
off.
GB-5
Summary of Contents for IGBS 3.6 USB
Page 4: ...2 2 A B C C 2 4 3 5 8...
Page 43: ......
