22
• Do not abuse the cord.
Never use
the cord for carrying, pulling or un-
plugging the power tool. Keep cord
away from heat, oil, sharp edges
or moving parts. Damaged or en-
tangled cords increase the risk of
electric shock.
• When operating a power tool out-
doors, use an outdoor extension
cord suitable for outdoor use.
Use
of a cord suitable for outdoor use
reduces the risk of electric shock.
Personal safety
• Stay alert, watch what you are do-
ing and use common sense when
operating a power tool.
Do not use
a power tool while you are tired or
under the influence of drugs, alcohol,
or medication. A moment of inatten-
tion while operating power tools may
result in serious personal injury.
• Use safety equipment.
Always
wear eye protection. Safety equip-
ment such as a dust mask, non-skid
safety shoes, hard hat, or hearing
protection used for appropriate con-
ditions will reduce personal injuries.
• Avoid accidental starting.
Ensure
the switch is in the off-position be-
fore plugging in. Carrying power
tools with your finger on the switch
or plugging in power tools that have
the switch on invites accidents.
•
Remove any adjusting key or
wrench before turning the tool
on.
A wrench or a key that is left at-
tached to a rotating part of the power
tool may result in personal injury.
•
Do not overreach.
Keep proper
footing and balance at all times. This
enables better control of the power
tool in unexpected situations.
•
Dress properly.
Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from mov-
ing parts. Loose clothes, jewellery or
long hair can be caught in moving
parts.
• If devices are provided for the
connection of dust extraction and
collection facilities ensure that
these are connected and properly
used.
Use of these devices can re-
duce dust-related hazards.
Power tool use and care
•
Do not force the power tool.
Use
the correct power tool for your ap-
plication. The correct power tool will
do the job better and safer at the rate
for which it was designed.
•
Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be con-
trolled with the switch is dangerous
and must be repaired.
•
Disconnect the plug from the
power source before making any
adjustments, changing accesso-
ries, or storing power tools.
Such
preventive safety measures reduce
the risk of starting the power tool ac-
cidentally.
•
Store idle power tools out of the
reach of children and do not al-
low persons Unfamiliar with the
power tool or these instructions
to operate the power tool.
Power
tools are dangerous in the hands of
untrained users.
Summary of Contents for GM 3000 S
