Ikon IB15F Service, Installation And Care Manual Download Page 16

Service and Installation Manual 

1

6

 

 

IKON WARRANTY 

One

 Year Parts & Labor Warranty

MVP  Group  (IKON)  warrants,  to the original  purchaser,  all  of its  new  equipment  to be free  from  defects  in material  and 

workmanship, under normal use and maintenance service, for a period of 

one

 (

1

) year from the date of original purchase or 

15 

months after shipment date from the manufacturer, whichever occurs first. Warranty coverage is limited to t

he repair and/

or replacement, including labor charges, of defective parts and/or assemblies. The labor warranty shall include straight time 

labor charges and travel charges within 100 miles roundtrip. Warranty service must be arranged by calling 

514 737-9701

, or 

toll free, 

1 888 275-4538 

for service in the United States and Canada. Warranty service coverage is not offered outside of 

the United States and Canada. 

Additional 

Four

 Year Compressor Warranty 

In addition to the 

one

 (

1

) year warranty stated above, IKON warrants its compressor units to be free from defects in both 

material  and  installation  workmanship  under  normal  and  proper  use  and  maintenance  service  for  a  period  of 

four

  (

4

additional years 

from the date of original installation but not to exceed five (5) years and three (3) months after shipment from

IKON. The

 four

 (

4

) year extended compressor warranty applies only to the compressor part itself and does not apply to other 

parts, components or labor charges involved in replacement of compressor.  
*RESIDENTIAL APPLICATIONS: MVP GROUP CORP. assumes no responsibility nor liability for any parts, or labor coverage

for component failure, or other damage resulting from installation in residential or non-commercial applications.

Conditions 

All service under this warranty, for either labor or parts, must be performed by a preferred service provider arranged by the 

IKON Warranty Department at 

514 737-9701

, or toll free, 

1 888 275-4538. 

Warranty claims should include model number of 

the unit, batch & serial number of the unit, and proof of purchase. Service coverage is limited to units located in the United 

States and Canada only. 

Limitation & Exclusive Warranty 

This part and labor warranty is the sol

e and exclusive warranty remedy offered by IKON. IKON’s sole obligation under this

 

warranty is limited to either repair or replacement of parts and is subject to the limitations listed below. 

1.

IKON will bear no responsibility or liability for any equipment which has been misapplied, mishandled, misused, subjected to

harsh chemical action, or external causes such as the use of extension cords, electrical power fluctuation, lack of proper

maintenance, non-factory approved revisions or modifications, or equipment damaged by fire, flood, or other acts of God.

2.

IKON 

will bear no responsibility for consequential loss or damages such as, including but not limited to, economic loss, profit

loss, personal injury, property damage, damage during transit, losses or damages arising from food or product spoilage

claims.

3.

IKON shall bear no responsibility for parts or labor coverage for component failure or other damages resulting from improper

usage, installation, or maintenance as described in the 

owner’s

 manual.

4.

Exceptions to 

one

 (

1

) year part warranty other than additional 

four

 (

4

) year compressor warranty. Light bulbs and door

gaskets are limited to 90 warranty period, parts only.

5.

IKON equipment is intended for commercial use only and this warranty is void if the equipment is installed in other than

commercial applications. IKON assumes no responsibility nor liability for any parts, or labor coverage for component failure,

or other damage resulting from installation in residential or non-commercial applications.

6.

All other warranties, either express or implied arising under law or equity or custom of the trade, including but not limited to,

warranties or merchantability or fitness for a particular purpose are excluded. IKON’s liability on any claim, including but 

not

limited to negligence, shall not exceed the price of the equipment that gives rise to the claim.

Summary of Contents for IB15F

















Reviews: