„00‟ means the number display mode is XXX (the default number is „00‟)
„01‟ means the number display mode is XXX-XX (This does not apply to the multi-button
pagers.)
Press [ENT] to change the number between
„00‟ and „01‟.
4) Press and hold [FUN] till
„F07‟ appears.
5) Press and hold [ENT] to back to standby mode. Display mode setting is done.
10. Password setting
1) Standby mode, press and hold [FUN] 3 seconds till
„F01‟ appears.
2) Press [ENT] repeatedly to choose
„F08‟.
3) Press and hold [FUN] till XXX appears on the screen.
4) Press [ENT] to change the flashing number, press [FUN] to change the cursor position
(The password is 181. Only when the number is 181, all functions can be set.)
Notes: It is better to set the password after all functions have been set. (If the number is
not 181, deleting the calling number function, function F02, F03, F06, F08, F09, F10 still
can be set, but F01, F04, F05,F07,F11 can not be set.) It can avoid misoperation.
5) Press and hold [FUN] till
„F08‟ appears.
6) Press and hold [ENT] till back to standby mode. Password setting is done.
11. Alarm clock setting
1) Standby mode, press and hold [FUN] 3 seconds till
„F01‟ appears.
2) Press [ENT] repeatedly to choose
„F09‟.
3) Press and hold [FUN] till
„1 XX:XX‟ and „2 XX:XX‟ appears on the screen(1 and 2 are the
sequence numbers of the alarm. XX:XX is hour and minute ).
4) Press [ENT] to set the sequence number of clock, hour and minute, press [FUN] to
choose the position.
5) Press and hold [FUN] till
„F09‟ appears.
6) Press and hold [ENT] till back to standby mode. Alarm clock setting is done. Then
please choose alarm clock ON or OFF.
12. Choose alarm clock ON or OFF
1) Standby mode, Press and hold [FUN] 3 seconds till
„F01‟ appears.
2) Press [ENT] repeatedly to choose
„F10‟.
3) Press and hold [FUN] till
„1: OFF (ON)‟ and „2: OFF (ON)‟ appears on the screen. (1 and
2 are the sequence numbers of alarm, ON-turn on, OFF-turn off
）
4) Press [ENT] to choose the alarm clock to ON or OFF, press [FUN] to choose the alarm
clocks.
5) Press and hold [FUN] till
„F10‟ appears.
6) Press and hold [ENT] till back to standby mode. Alarm clock ON/OFF setting is done.
Notes: when the alarm clock is on,
a) Alarm prompt mode is vibration
b) Alarm prompt time is the same with the vibration time set in
„F02‟
c) Alarming in standby mode or calling mode (called number is displaying on the screen),
alarm mark is flashing.
