IKL GULIVER TERMO, User Manual

Page: 6 / 21

3. INSTALATION
Picture.1
1. Top plate frame 11. Side
decoration 21. Handle for
shaking of embers
2. Top plate 12. Back
batten 22. Fire door
3. Burner 13. Stand
frame 23. Door handle
4. Smoke exaust 14. Front
batten 24. Regulation of
secondary air
5. Handle gas flow
regulator 15. Oven
door 25. Cauldron
6. Decorative top
plate 16.
Decorative
botom plate 26. Decorative
gallery
7. Back side 17. Screws of
decorative
plate 27. Cover of the
smoke exaust from
the top side
8. Cover of the smoke
exaust from the back
side 18. Drawer 28. Regulation
button of draft
9. Small side
decoration 19. Ashtray
door
10. Regulation of
draft
20.
Regulation of
primary air
Stove is connected to the chimney flue pipe appropriate, to ensure adequate tightness
and flow of smoke from the stove to chimney .Flue pipe must not be too deep in the
chimney so it would not reduce the area of cross section and thus violated the drafts in the
chimney.
Stove allows revolusion of the flue gases from the top (item 4) or last (item 8) over the
side of the stove, through respective ranges of ports that are on opposite side of the side of
fireplace.Standard stove parts are connection to flue pipe and the cover of smoke.
Standard cover is set on the back side, a connector for connecting the flue pipe is in the
drawer, and if the user wants that the smoke exaust is from above, it is necessary to fix
the connection to the required space. Way of tying the cover and the connector is with
screws.