11. Be sure there is adequate ventilation whenever you operate the engine. Do not add fuel or start
the engine in an enclosed area.
PARTS
OPERATION
1. Preparation
See picture 2 for reference to assembly the handle bar. Remove the bolt 4 & adjuster 1 and attach
the adjusting steel assembly over the girder 5. Insert bolt 4 and secure it with nut. Put the adjuster 1
in, select the appropriate holes 2 and tighten the adjuster with clip 3.
Picture 2.
1. Adjuster 2. Adjustment hole 3. Clip
4. Bolt
5. Girder
Picture 1.
1. Engine
8. Handle bar
15. Oil filler cap
2. Girder
9. Bolt bar
16. Switch
3. Bolt
10. Drag bar
17. Chain box
4. Handle height adjuster 11. Belt cover
18. Tine
5. Break knob
12. Mudguard
19. Recoil starter
6. Backward handle
13. Tine wheel
7. Forward handle
14. Front wheel
