41
Insert the S-hook of the ratchet into the hole of the bent corner leg (3). Pump the ratchet
handle repeatedly to tighten the strap (fig. 17).
Repeat the same procedure to install the back panel (21) to its proper position.
Step 7: Installing cover
NOTE: The roof tarp (19) is pre-assembled with tube sleeves along its lower
part on each side.
Lay the roof tarp (19) on the ground next to the frame. Make sure that the ends with the
black straps are alongside the front door/back panels (20, 21) and the tube sleeves are fac-
ing upward (fig. 18).
Strap inside the panel
Fig. 16
Fig. 17
