c)
Lift the other side of the carport steadily and repeat step 3 b). Make sure that the cross-measures from cor-
ner to corner are exactly the same.
d)
Secure the roof tarpaulin to the end tube with the rope and tarpaulin fastening rings. This way the roof tar-
paulin is attached to the frame. Make left and right side of the tarpaulin equally long.
e)
There are two ropes inside the roof tarpaulin ends. Tighten these ropes so that the
roof end comes down and covers the frame. Use enough strength and tighten the
front and rear ends equally long. Then tie the rope to the spiral peg as shown in the
figure.
f)
Position anchoring brackets over the connection tubes and anchor them to the
ground by pushing the anchoring pegs crosswise from both sides of the brackets as
illustrated in the picture below.